4-27-2023 Q&A: Lesson Search, Box Gadgets, Bread Plate, Grid Snapping, Drilling Acrylic, Copying Tool Database, Inner Circle Component, Double-Sided Bowl, Vacuum Table, Small Text Inlays and More.

In our April 27th Q&A Meetup, we tackled an array of questions that stretched from navigating Vectric software for specific projects like box gadgets and bread plates, to technical tips on grid snapping and drilling into acrylic. The session was rich with insights on creating spoons, managing tool databases, and even detailed walkthroughs on making double-sided bowls and optimizing pocket toolpaths for guitar bodies. Beyond the technical, we also explored community features like the student map and entertained the idea of building a vacuum table. The call was a deep dive into the nuances of CNC machining and woodworking, providing practical advice on bit selection for materials like melamine and Baltic Birch, and discussing the feasibility of creating pocket holes on CNC. This meetup was not just about solving problems but also expanding the creative and technical horizons of our students, making it a must-watch for anyone looking to enhance their CNC and woodworking skills.

Questions Answered in this Q&A:

• 00:02:00 - How to do a search for a specific lesson?
• 00:02:23 - Is there a specific lesson on box gadgets?
• 00:03:01 - Help with bread plate from last week.
• 00:10:10 - Is there a way to adjust the spacing or grid pattern when grid snapping?
• 00:10:57 - Does anyone have any experience drilling acrylic on the CNC?
• 00:21:35 - Is there any videos on how the spoon was created?
• 00:26:55 - Is it possible to copy the tool database of the bits to another computer?
• 00:28:46 - How do I make the inner circle component so I can dish it out, when having an inner and outer circle?
• 00:31:20 -Help with doing a double-sided bowl.
• 00:34:07 - I'm having problems with the pocket toolpath in this guitar body.
• 00:36:02 - How do we add ourselves to the student map and see where everyone else is?
• 00:37:31 - Can we add building a vacuum table into our live lesson requests?
• 00:38:14 - When using the inlay toolpath for small text, is there a limit for how small it can go and is there a font tool to use for small text?
• 00:43:40 - Can you help me out with bit options/feed and speeds for three quarter inch melamine?
• 00:52:34 - Has anyone cut pocket holes on the CNC VCarve file?
• 00:54:35 - What bit is best for drilling holes, specifically for melamine and Baltic Birch? 

Keywords:

lesson search, box gadgets, bread plate project, grid snapping, drilling acrylic, spoon creation, tool database copying, dishing out circles, double-sided bowl, guitar body pocketing, student map, vacuum table building, inlay toolpaths for small text, bit options for melamine, pocket holes on CNC, drilling holes in melamine and Baltic Birch, Vectric software, CNC troubleshooting, creative solutions, design techniques, material handling, project optimization, digital fabrication, educational guidance, interactive learning, technical advice