4-23-2024 Q&A: Vectric VCarve Pro 12 Issues: Stream Deck Shortcuts, Undo/Redo, Carving Tips, and Creating SVGs from STL Files

In this Q&A Meetup, we tackled a diverse set of challenges and questions from our community, particularly focusing on the nuances of upgrading to Vectric VCarve Pro version 12. Participants discussed issues with non-functioning shortcuts on Stream Decks after updating their software, and explored solutions for restoring missing undo/redo arrows and other interface elements. We delved into technical inquiries about the possibility of using specialized milling tools like flat tipped, tapered end mills and strategies for removing borders from imported graphics. Additionally, the session covered practical advice on optimizing carving projects to reduce waste by segmenting large designs into smaller, manageable pieces without compromising on depth settings across varying font sizes. We also addressed troubleshooting peripheral device inputs, converting STL files to SVGs directly within Aspire, and resolving uneven finishes in carved projects. This Q&A was rich with insights and troubleshooting tips, making it a valuable resource for CNC users aiming to enhance their skills with Vectric software.

Questions Answered in this Q&A:

• 00:03:36 - I just upgraded VCarve Pro version 12 and I noticed my shortcuts on my stream deck no longer work. For example, zoom to fit, ctrl plus f, they work on my keyboard but not on my stream deck. I've set the stream deck to the correct key exe file and I have up to date version of Stream Decked. I reprogram my Stream Deck to zoom to fit but it still does not work. Anybody having similar experience?
• 00:19:10 - Where do you find the undo redo arrows?
• 00:20:03 - Is there such a thing as a flat tipped end mill, tapered end mill?
• 00:32:17 - Is there's a way to eliminate the border around imported graphics?
• 00:34:13 - Is there a way to have this carve on three separate smaller pieces to avoid waste? Also with different sizes and types of fonts, is it okay to use one setting of a quarter inch depth for all three components of the sign? Any recommendations for the measurement, use, and depth, glue gap, and gap?
• 00:44:01 - F9 key with mouse, help.
• 00:47:30 - In Aspire version 12, is there an easy way to make an SVG from an STL file?
• 00:52:44 - The dolphin didn't clear flat.

Keywords:

 vectric version 12, stream deck shortcuts, mac parallels black screen, tool cabinet design, lightburn vs vectric laser module, clipart enhancements, carving definitions, flat tipped end mill, imported graphics border, multi-piece carving, zoom shortcut issues, svg from stl, undo redo arrows, 3d roughing paths, entwined rings clipart, troubleshooting, cnc software updates